SAFETY
5. While Using Lift:
INSTRUCTIONS
A. Avoid excessive rocking of
B. Always use safety stands as
Proper maintenance
and inspection
is necessary
c
for safe operation.
CAUTION
6. To Lower Lift:
A. Remove all tools or other objects
B. Raise lift off locking latches.
C. Push AIR LATCH release handle
Always use
D. Push LOWERING valve handle to
safety stands when
removing or installing
heavy components. ©
Note: The AIR LATCH release tog-
WARNING
Do not override
self-closing
lift controls.
©
Positioning the vehicle
For longer wheel base vehicles, position the
vehicle on the forward spotting dish. For
shorter wheel bases, position the vehicle on
the rear spotting dish. Due to varying centers
of gravity within different vehicle classes, use
the dishes as quides only and locate the arms
beneath the vehicle pickup points. Always
position vehicle with its center of gravity in line
with the lift columns. Slightly raise the vehicle
and check for stability. Do this by pushing up
and down on the front and rear bumpers. The
vehicle should sit firmly on all pickup points.
If necessary, relocate arms and/or vehicle to
attain a stable condition. Also refer to the ALI
Safety Manual included with the lift.
Truck Frame
Lift
Adapter
Section "A - A"
Fig. 1
Forward Spotting Dish
vehicle while on lift.
needed or when removing or
installing heavy components.
from lift area.
fully and hold.
lower.
gle and LOWERING valve handle
are deadman-type design. Each
must be held down to lower lift.
Do Not override self-closing lift
controls.
Typical Lift Points
Truck
A
A
Rear Spotting Dish
WARNING
Remain clear of lift
when raising or
lowering vehicle.
7. Remain clear of lift when lowering vehicle. Observe
pinch point warning decals.
8. Remove adapters from under vehicle and swing arms to
full drive-thru position before moving vehicle.
9. If lift is not operating properly, Do Not use until ad-
justment or repairs are made by qualified lift service
personnel.
SAFETY
INSTRUCTIONS
Do not operate
a damaged lift.
SINGLE PHASE
Latch
Release
5
Keep feet
clear of lift
while lowering.
©
SAFETY
INSTRUCTIONS
Proper maintenance
and inspection
is necessary
for safe operation.
©
SHOCKWAVE
Fig. 3
Raise
Switch
Lowering
Valve
Handle
WARNING
©
c
Raise
Switch
Lowering
Valve
Handle
Latch
Release