Publicidad
Idiomas disponibles
Idiomas disponibles
Transport Handles
1. Place the machine on its feet and firmly tighten all bolts of bench, legs and braces (except those of the
wheel assembly).
2. Firmly tighten the wheel assembly in the position where the wheels slightly touch the ground.
3. The two transport handles are attached at the left and right leg at the front of the saw using four
hexagon bolts M6×12, washers 6 and nuts M6.
4. Fasten the hooked bolt to the right-hand leg side using 2 nuts M6. the hook serves for storing the saw
blade key and the push stick.
EN
A – Flange Nut
B – Hooked Bolt
Publicidad
