Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Set the Cutting Width
The rip hence has to be used when making longitudinal cuts in wooden workpieces.
The rip fence should be mounted on the righthand side of the saw blade. Before move the rip fence,
release the rip fence locker. See the position in illustration 1.
The rip hence can be set to the required dimension with the help of the scale on the bench table.
After reaching to the required dimension, hold the rip fence locker up to fix rip fence in place. See the
position in illustration 2.
A – Rip Fence
B – Lock
Publicidad
