MSW Motor Technics MSW-SAW 2200 1P Manual De Instrucciones página 54

Rip Fence Locker
1. Slide the locker seats to the locker shaft. See illustration 1.
2. Fasten the whole rip fence locker to the bench table using two bolts M6×30 and nuts. See
illustration 2.
3. Fasten the switch to the bench table using two hexagon bolts M6×12, washers 6 and nuts M6. See
illustration 3.
4. Attach the rip fence onto the rip fence locker. After reaching to the required cutting width, then hold
the locker up to secure the rip fence in place. See illustration 4.
EN
A – Shaft
B – Rip Fence Locker Seat