Publicidad
Idiomas disponibles
Idiomas disponibles
NOTICE
FOR THE CUSTOMERS
IN THE
UNITED
KINGDOM
IMPORTANT
The wires in this mains lead are coloured in accordance
with
the
following code:
Blue:
Neutral
Brown:
Live
As the colours of the wires
in the
mains
lead
of this apparatus
may not correspond
with the coloured
markings
identifying
the
terminals in your plug proceed
as follows:
The
wire
which
is coloured
blue
must
be connected
to the ter-
minal which is marked with the letter N or coloured black.
The wire which is coloured brown
must be connected to the
ter-
minal which is marked with the letter L or coloured
red.
CONNECTION
DIAGRAM
FM antenna
FM ribbon antenna (supplied)
AM antenna wire (attached)
SYSTEM
CONNECTIONS
CONNECTION
NOTES
eThe
power
cord
should
be connected
last of all, first making
sure that the POWER
switch is in the OFF position.
e To assure correct matching at the input and output terminals of
your
audio
system,
refer to the table of " SPECIFICATIONS"
on
page 8, and to the specifications
given in the instruction
manual
provided
with
your
amplifier.
Generally
the
output
level of the
tuner should be equal to or slightly greater than the sensitivity of
the corresponding
input.
Also the output impedance
of the tuner
should
be considerably
lower than the impedance
of the corres-
ponding input.
eThe cable connectors should be fully inserted into the jacks.
A
loose connection
may cause
hum
and noise.
eBe
sure
to connect
the red plug to the right [R] jack, and the
remaining one to the left [L].
ST-515
rear
ground wire
to tuner inputs
ere
to an ac outlet
speaker
stereo amplifier
speaker
Publicidad
