Publicidad
Idiomas disponibles
Idiomas disponibles
FM AND
AM
RECEPTION
WITH
THE
PROGRAM
SENSOR
SYSTEM
Once
you
preset the Station
Markers
on the Dial Scale, the pro-
gram
selection
is made
by simply setting the Dial Pointer to the
desired
Station
Marker.
Preset the FM and AM
Station Markers
according to the following example.
FM STATION
MARKER
PRESETTING
To
preset
the
left end
FM
Station
Marker
for the
desired
FM
station, for example, proceed as follows:
@ Depress the POWER
switch to turn on the unit.
© Make sure the PROGRAM
SENSOR
button is released.
O Select the FM band with the FUNCTION
selector.
© Turn
the TUNING
knob
and
match
the
Dial Pointer with the
left end FM Station Marker.
O While
keeping
the
FM
PROGRAM
button depressed, turn the
TUNING
knob
to tune
in the desired FM station.
See "SIGNAL
INDICATOR
AND
LOCKED
LAMP".
e The Dial Pointer and the Station Marker will move
together.
@ After
tuning,
release
the
PROGRAM
button
and
turn
the
TUNING
knob to another
Station
Marker
for the next
presetting.
@ When
all the
presetting
is finished,
depress
the
PROGRAM
SENSOR
button.
The
indicator
lamp
lights
in orange
showing
that the Program
Sensor
System is operative.
AM
Station
Markers
FM
Station
Markers
Dial Pointer
AM STATION
MARKER
PRESETTING
AM
Station
Marker
presetting
procedures
are
the
same
as for
"FM
STATION
MARKER
PRESETTING"
except
for the following
points.
© Select the AM
band with the FUNCTION
selector.
© While
keeping
the AM
PROGRAM
button depressed, turn the
TUNING
knob
to tune in the desired AM station.
See "SIGNAL
INDICATOR
AND
LOCKED
LAMP",
Notes on presetting
eFirst, decide which Station Marker for which station, because a
Station Marker cannot
pass another one.
ePlacing
the unused
Station
Markers
at the left or right end of
the
Dial
Scale
is recommended
to avoid tuning in an undesired
station.
e Do not attempt to move two or more Station Markers simultane-
ously.
eUp
to five stations
can
be
preset
for FM
and
AM
reception
respectively.
SIGNAL INDICATOR
AND
LOCKED
LAMP
In FM reception, the correct tuning is shown
by the full illumina-
tion of the SIGNAL indicator and the LOCKED
lamp.
In AM reception, the correct tuning is shown by the full illumination
of the SIGNAL indicator.
RECEPTION
@ Depress the POWER
switch to turn on the unit.
@ Make sure the PROGRAM
SENSOR
button is depressed.
© Set the MODE
selector to STEREO.
© Set the Dial Pointer to the desired Station Marker.
e When
receiving an FM stereo signal, the STEREO
lamp will light
up automatically.
O Adjust the volume
and tone
quality with
the controls of the
amplifier.
eA
desired station
can
be tuned
in quickly,
because
the
non-
preset stations are automatically bypassed.
eThere
is no
need
to set the
FUNCTION
selector.
When
the
Dial
Pointer
matches the FM
(or AM) Station
Marker, the FM (or
AM) band operates automatically.
e When
the Dial Pointer matches the FM (or AM) Station
Marker,
the frequency of that received FM (or AM) station is displayed
at
the
Digital
Display.
When
no
Station
Marker
is matched
with
the
Dial
Pointer,
the
FM
frequency
is displayed
at the
Digital
Display.
elf you wish to receive a non-preset station, depress and release
the
PROGRAM
SENSOR
button, and tune in the desired station,
proceeding as in "FM AND
AM
RECEPTION
WITHOUT
THE PRO-
GRAM
SENSOR
SYSTEM".
elf an
FM
Station
Marker and an AM
Station
Marker are preset
at the
same
position,
the
reception
of the
FM
station is given
priority when
the Dial Pointer is set to that position.
To receive
the AM
station, in this case, depress and release the PROGRAM
SENSOR
button, and set the FUNCTION
selector to AM.
Publicidad
