Dust Bin Filter Changing/Cleaning - Sears Kenmore 116.33728 Manual Del Propietário

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

TO REPLACE DUST BIN
First
align base of dust bin with tabs located
on the vacuum. Then
rotate dust bin in
place making sure dust bin is securely
latched.
Occasionally
deep cleaning
of the filter may
be required.
Remove the dust bin as outlined in the
DUST BIN CLEANING section.
To deep clean dust bin filter, first remove it
from the dust bin by grasping
and pressing
on either side of the filter as shown in the
illustration.
Then remove
filter by pulling straight
out from dust bin.
Press.---..__
Here
Here
Remove cleaning
tool from the cleaning
tool
holder located on the side of the dust bin as
shown.
Dust-"
Bin
Too_Cleaning
Hold filter over a trash container.
Insert
tool in filter element and brush debris
downward
into the trash
container.
Repeat
Dust Bin
until filter is com-
pletely clean.
Cleaning
Tool
Trash
Container
To reinstall a new or cleaned filter into the
dust bin make sure the alignment
tabs on
the filter are aligned with the alignment
notches
located at the top and bottom of the
dust bin.
Press filter firmly into the dust bin making
sure that the locking tabs are
securely
in place before
placing dust bin back in
the vacu-
um,
Alignment---_
Notch
Alignment
Tabs
13
Filer

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Kenmore 116.33729

Tabla de contenido