Publicidad
Idiomas disponibles
Idiomas disponibles
EN
3. USE GUIDELINES
The device is designed for squeezing dough in the shape of
churros and frying them.
The user is liable for any damage resulting from
unintended use of the device.
3.1. DEVICE DESCRIPTION
RC-CMM287
1
2
3
4
5
6
RC-CMM285
1
2
3
4
5
6
10
RC-CMM282
1
2
3
4
5
6
1.
lever
2.
feeder
3.
hopper
4.
temperature adjustment panel
5.
fryer
6.
base
TEMPERATURE ADJUSTMENT PANEL
RC-CMM287
3
4
1
2
5
1.
ON/OFF switch:
•
„I" – device turned on
•
„O" – device turned off
2.
a light that indicates oil heating in the fryer
3.
a temperature regulating knob
4.
a timer (activated by the „TIME ALARM" switch)
5.
„TIME ALARM" – responsible for timer activation and a
sound signal informing that the set time has elapsed:
•
„I" – alarm activated
•
„O" – alarm deactivated
Rev. 24.05.2022
•
the „ON" pilot light turned on means that the set time
has not elapsed yet
•
the „UP" pilot light turned on means that the set time
has elapsed
RC-CMM285/RC-CMM282
2
3
1
4
1.
temperature adjustment knob
2.
a light that indicates oil heating in the fryer
3.
a light that indicates power supply
4.
„RESET" – responsible for the immediate disruption of
device operation
APPLIANCE LOCATION
The device should always be used when positioned on an
even, stable, clean, fireproof and dry surface, and be out of
the reach of children and persons with limited mental and
sensory functions.
Disassemble the device and all its components and clean
them before the first use.
ASSEMBLING THE APPLIANCE
Most of the elements come assembled.
APPLIES TO ALL MODELS:
1.
Use the enclosed screws to fix the plate supporting
the feeder structure. For RC-CMM285 / RC-CMM282,
a rack mount must be installed instead of the plate.
2.
Screw the structure to the fryer.
3.
Screw the arms into the lever.
Rev. 24.05.2022
EN
3.2. DEVICE USE
1.
The dough must be fried in hot oil, therefore, at the
very beginning of the churros production process,
connect the fryer to the power supply and heat the oil.
2.
Turn the fryer on using the switch (for RC-CMM287)
and turn the temperature knob to the desired
temperature. An orange light will come on, which
means that the heater is heating up. The light turned
off means that the desired (set) temperature has been
reached.
3.
The heater will keep turning on automatically to
maintain the desired temperature when the oil
temperature drops. The orange light will come on
again then.
4.
When the oil is at the desired temperature, turn the
lever several times to raise the piston.
5.
Open the feeder and insert the dough.
6.
Screw on the desired hopper to shape the donuts.
7.
Turn the lever in the opposite direction until the
dough is squeezed out of the hopper and tear off by
hand when the piece is the desired length.
8.
Gently put the pieces into the fryer.
9.
Take the pieces out when they are fried with the tongs
or chopsticks. Under no circumstances put your hands
in the fryer!
3.3. CLEANING AND MAINTENANCE
a)
Unplug the mains plug and allow the device to cool
completely before each cleaning, adjustment or
replacement of accessories, or if the device is not
being used.
b)
Use only mild, food-safe detergents to wash the
device.
c)
After cleaning the device, all parts should be dried
completely before using it again.
d)
Store the unit in a dry, cool place, free from moisture
and direct exposure to sunlight.
e)
Do not spray the device with a water jet or submerge
it in water.
f)
The device must be regularly inspected to check its
technical efficiency and spot any damage.
g)
Use a soft, damp cloth for cleaning.
h)
Do not use sharp and/or metal objects for cleaning
(e.g. a wire brush or a metal spatula) because they
may damage the surface material of the appliance.
i)
Do not clean the device with an acidic substance,
agents of medical purposes, thinners, fuel, oils or
other chemical substances because it may damage
the device.
11
Publicidad
