Safety information
Electrical connection
Special regulations apply for electrical installation in outdoor spaces. Only a qualified electri-
cian may perform the electrical installation.
– The qualified electrician has the necessary professional training, knowledge and experience
to perform electrical installation in outdoor spaces. The electrician can detect potential
dangers and knows how to adhere to regional and national standards, regulations and direc-
tives.
– For your own safety, please consult a qualified electrician.
Only connect the unit if the electrical data of the unit and the power supply match.
Only plug the unit into a correctly installed outlet. Ensure that the unit is fused for a rated
fault current of max. 30 mA by means of a fault current protection device.
Extension cables and power distributors (e.g. outlet strips) must be suitable for outdoor use
(splash-proof).
Protect open plugs and sockets from moisture.
Safe operation
Do not use the unit, if electrical lines or the housing are damaged.
Do not carry or pull the unit by its power cable.
Route lines in such a way that they are protected from damage and do not present a tripping
hazard.
Never carry out technical changes to the unit.
Only carry out work on the unit that is described in this manual.
Only use original spare parts and accessories.
14