Oase ProMax ClearDrain Serie Instrucciones De Uso página 18

Manual mode ProMax ClearDrain 7000
The pump remains permanently switched on if the float switch is set vertically and the cable
points downward.
NOTE
The pump can run dry in manual mode. Running the pump dry increases wear.
Switch off the pump when the minimum water level is reached.

 Move the handle into the horizontal position and push the cable directly at the transition to
the float switch into the cable clip such that the float switch is in a vertical position.
Automatic mode ProMax ClearDrain 11000, 14000
The pump switches on when the rising water reaches the sensor.
Metal contacts at the bottom of the sensor strip detect the minimum water level (switch-off
point). When the minimum water level is reached, the pump switches off.
 Fit the sensor onto the sensor strip in the desired switch-on position.
18
POX0005
POX0007