Oase ProMax ClearDrain Serie Instrucciones De Uso página 20

Installing the pump
 Install the pump in a horizontal and stable position in the water.
 If it needs to be lowered into a well or a shaft, fasten a rope to the handle. Do not carry it by
the power connection cable.
 Install the pump such that it does not take in dirt particles with a size >5 mm, which would
block the intake. Install the pump in a raised position if necessary.
 ProMax ClearDrain 7000: Ensure that the float switch can always move freely.
Operation
WARNING
Risk of severe injuries or death by electric shock.
Only operate the pump if no persons are in the water.

Disconnect all electrical devices in the water from the power supply before reaching into the

water.
NOTE
The pump is not suitable for continuous operation. Continuous operation will reduce the pump
service life accordingly.
Switching on the unit
 Insert the power plug into the socket.
– The pump is ready for operation.
– The pump will start up as soon as the level of the water reaches the switch-on height.
Switching off the unit
 Disconnect the power plug.
– When the pump is switched off, residual water in the hose may flow back and out of the
pump intake.

After using the pump, rinse it with clear water.
20
POX0003