GE PGS908 Manual Del Propietário página 32

Careand c/ean&goftherange.
Be sure all controls are off and all surfaces are cool before cleaning any part of the range,
il, WARNING:Ifyour
range is removed for cleaning, servicing or any
reason, be sure the anti-tip device is reengaged properly when the range is replaced,
, Failure to take this precaution could result in tipping of the range and cause inju_
How to Remove Protective Shipping Film and Packaging Tape
Careflflly grasp a corner of die protective
shipping film with yore fingers and slowly
peel it flom the appliance surfime. Do
not use any sharp imms to iem(we the
film. Remove Ml of the film before using
the appliance for the first time.
To assure no damage is done to die
finish of die product, die safest way to
iemove the adhesive flom packaging tape
on new appliances is an application of a
household liquid dishwashing dew,gent.
Apply with a soR cloth and Nlow to soak°
NOTE:Theadhesive mustbe removed fromall
parts.It cannotberemoved if it is bakedon.
Front r ightbuinei (onsomemodels)
Burnercap
aura!!has i
MakeSuretheholeintheburner
headispositioned overtheelectrode
andthotbe bumerheadis fully
inserted insidetheburnerbase,
A smallgapbetweenthebase
andheadis normaL
Front rightburner(on somemodels), f ront
left burner, back rightburnerandbackleft
burner
Burnercap
Burner h ead
Useasewing
chamber i needle or
twist-tie to
unclog t he
small h olein
the burner
Bum6 head.
Make Sure the Slot #7the burner head
@positioned over the electrode, The
bumer cap has three to four pins.
When replacing the cap, make sure
none ofthe pins sits in the stability
chamber,
Burner Caps and Heads
The burner assemblies shoukt be washed
regularly and, of course, after spillove_.
Turnall controls off before removing burner parts.
The burner grates, burner heads and
burner caps can be removed for easy
cleaning°
The elecuode of die spark ignker is
exposed beyond the surface of the
burner base. When cleaning the cooktop,
be careflfl not to snag the electrode of
the spark igniter with your cleaning
cloth. Damage to the igmiter couM occm:
Toavoid snagging a cloth on the spark
igniter, leave the bumer heads in place
when cleaning the coektop.
Be careflfl not to push in any cooktop
controls while cleaning the cooktop.
A slight electrical shock might resuk
which couM cause you to knock over /
hot cool<ware.
Large eurner
head and cae
Wash burner parts wifll an all-propose
non-abrasive cleaner alld _VaI_lll water
Soak stubborn soil. Dry diem with a
cloth--do not reassemble while wet.
To re_kssemble, replace
the burner head
first, then the burner cap and fina|l) the
burner grate.
Make sure flint the heads and caps are
replaced in the correct locations. There
is one small_ one medium_ one large
and one exua large burner head
and cap.
Medium burner Sinai ourner
head and cae heaa ano cae
" Ig
® o
Front o frange (onsomemodetst
ton _els}
Extra large t_urner
head and car
A CAUTION:Be NOTOPERATE
THE BURNER WITHOUT A LLBURNER PARTS
IN PLACE,
32