cecotec Cumbia CREMMAET COMPACT STEAM Manual De Instrucciones página 22

ENGLISH
3. Select the desired amount of coffee.
4. During grinding (the control panel display shows "g"), press the "
adjust the amount of coffee powder. During coffee preparation ("ml" is displayed on the
right-hand side of the control panel display), press "
liquid coffee.
5. Press the " " button to prepare two cups of coffee.
6. Press " " to stop coffee preparation.
Frothing the milk
1. Set the steamer to the desired position and insert it into the milk. Fig. 17
2. Press ' ' to turn on the steamer.
3. Once the milk is frothed as desired, press the '
frothing milk.
If you consider that the milk is not sufficiently frothed, press the '
to increase the frothing time.
Note:
Immerse the steamer in water after frothing the milk. Clean the steamer following the same
process as for milk frothing. Wipe the steamer with a clean cloth to prevent milk from sticking
to the inside wall or clogging the steamer.
Preparing hot water
1. Adjust the height of the coffee spout and place a cup underneath. Fig. 7
2. Press the hot water button " " to dispense hot water.
3. Once the desired amount of hot water is obtained, press the "
to stop dispensing water.
Cleaning/Rinsing
1. Adjust the height of the coffee spout and place a container underneath. Fig. 7
2. Press and hold down the button "
coffee machine. This function uses 60 ml of water and is automatically deactivated.
Settings and configuration
In standby mode, press and hold the settings button "
configuration interface.
1. Settings for Espresso and Americano coffee. Fig. 8
a. Once inside the setting interface, the Espresso and Americano buttons will flash.
b. Press the Espresso button " " or the American button "
coffee you want to change.
42 CREMMAET COMPACT STEAM
" or " " buttons to
" or " to adjust the amount of
' button on the control panel to stop
' button during the process
" button on the panel
" for 3 seconds to start cleaning/flushing of the
" for 3 seconds to access the
" depending on the type of
c. Once you have pressed the desired button, you have accessed the interface for setting
the amount of coffee powder. Press "
coffee powder.
d. Then, press the Settings/Exit button "
press " " or " " to increase or decrease the Espresso flow rate.
e. When the configuration is finished, press the "Settings/Exit "
the next step, and press the button 7 times to return to the standby interface.
2. Temperature settings.Fig. 9
After configuring the quantity and flow rate settings, press the Settings/Exit button "
" to enter the temperature settings interface. Press the button "
temperature.
3. Automatic shutdown settings.Fig. 10
After configuring the quantity and flow rate settings, press the Settings/Exit button "
enter the automatic shutdown settings interface. Press "
machine to shutdown (0.5 h, 1 h, 2 h... 24 h).
4. Start-up settings.Fig. 11
After configuring the quantity and flow rate settings, press the Settings/Exit button "
enter the automatic start-up settings interface. This function is for authorised professionals
or after-sales personnel only.
5. Manufacturing information.Fig. 12
After setting the temperature adjustment, press the Settings/Exit button "
check both the manufacturing information and the date and batch number.
6. Decalcification. Fig. 13
A. Pour the descaler into a container with clean water and follow the manufacturer's
instructions.
B. Take out the water tank, pour the descaling product into the tank and add clean water
until the tank is completely full, never exceed the maximum.
C. Place a container under the coffee spout.
D. In the standby interface, press and hold the Settings/Exit button "
seconds. Then press the Settings/Exit button "
indicator " " will light up on the display.
E. Press the Confirm button " " to start descaling.
F. Once emptied, remove the water tank and add fresh water until the coffee machine
completes the cycle. This process may take a few minutes. When the container is full,
empty it.
G. When descaling is complete, be sure to carry out several Cleaning/Rinse cycles as
indicated in the "Cleaning/Rinse" section.
ENGLISH
" or '" " to increase or decrease the amount of
" to enter the coffee flow setting interface:
" button to advance to
" or " " to adjust the
" or " " to programme the coffee
" 4 times to
" and wait for 2
" again four times and the descaling
CREMMAET COMPACT STEAM
" to
" to
43