Identification And After-Sales Service; Technical Specifications - Grillo GF1 Manual De Instrucciones

Ocultar thumbs Ver también para GF1:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

GF1 / Translation of the original instructions
3) Never have anyone check the machine while you are driving and the engine is running.
4) Never clean the cutter bar or other accessories with the engine running.
5) The rotating blades of the rotary cutter are very dangerous. Never place your hands or feet under the cutting deck.
6) Never change the engine settings, especially the max. rpm.
7) Allow the engine to cool before placing the machine indoors.
8) CAUTION: to reduce the risk of fire, keep the engine, the exhaust pipe and the exhaust manifolds free from
grass, leaves, dust, etc.

IDENTIFICATION AND AFTER-SALES SERVICE

The machine's serial number is printed on the nameplate on the frame. Always state the serial number when
ordering spare parts.
AFTER-SALES SERVICE
This handbook provides instructions for the use of the motor-mower and for correct basic servicing which the
user can carry out himself. For all procedures not described in this handbook, contact your local dealer.
SPARE PARTS
Always use original spare parts, as they are the only ones to offer complete safety and interchangeability.
Always state the serial number when ordering.
For engine parts, refer to the specific engine handbook.
WARRANTY
The warranty is provided according to and governed by Applicable Law.
The engine warranty conditions are those of its manufacturer.
WE ADVISE YOU TO KEEP THE FOLLOWING SPARE PARTS TO HAND
For the motor-mower:
1 throttle cable
1 clutch cable
1 throttle lever
ORDERING SPARE PARTS
Always state the machine serial number and the code number of the part to be replaced.
Contact your local dealer. Our address is:
GRILLO S.p.A.
Via Cervese 1701 - 47521 CESENA (FC) - ITALY
Tel. 0039 / 0547 / 633111 - Fax 0039 / 0547 / 632011
Website: www.grillospa.it - E-mail: grillo@grillospa.it

TECHNICAL SPECIFICATIONS

ENGINE: 4-stroke, petrol, 5 ≠ 5,5 Hp;
GEARBOX: 1 speed gear in oil bath.
P.T.O.: at 943 rpm, clockwise rotation.
HANDLEBARS: adjustable in height.
SAFETY DEVICES: in accordance with the law: inverted clutch.
ACCESSORIES: 86 cm. cutter bars, snow thrower, rotary cutter, spray pump, cm.80 front scraper.
WEIGHT (with cutter bar): Kg 65.
SPEED (with wheels 13.5-6): 2,20 Km/h
6

Publicidad

Tabla de contenido
loading

Tabla de contenido