Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING:
TO AVOID SERIOUS
INJURY,
BEFORE
PERFORMING
ANY SER-
VICE OR ADJUSTMENTS:
1, Depress
brake pedal fully and set parking
brake°
2o Place attachment
clutch
in "DISENGAGED"
position,
3o Turn ignition
key to "STOP" and remove key,
4.
Make sure the blades
and all moving parts have completely
stopped°
5.
Disconnect
spark plug wire from spark plug and place wire where
it cannot
come in contact
with plug.
TRACTOR
TO REMOVE
MOWER
1, Place attachment
clutch
in "DISEN-
GAGED"
position.
2.
Lower attachment
lift lever to its lowest
position_
3.
Disengage
belt tension
rod (K) from
lock bracket
(L).
_tb CAUTION:
Belt tension
rod is spring
loaded.
Have a tight grip on rod and re-
lease slowly,
4.
Remove
mower belt from electric
clutch pulley (M).
5.
Disconnect
front link (E) from mower
* remove
retainer
spring
and washer.
6.
Go to either side of mower and discon-
nect mower suspension
arm (A) from
chassis
and rear lift link (C) from rear
mower bracket
(D) - remove retainer
springs
and washers.
7.
Go to other side of mower and discon-
nect the suspension
arm and rear lift
link.
,_
CAUTION:
After rear lift links are dis-
connected,
the attachment
lift lever will be
spring
loaded.
Have a tight grip on lift lever
when chanaino
Position of the lever._
8o Turn tractor
steering
wheel to the left
as far as it will go,
9.
Slide mower out from under right side
of tractor,
TO INSTALL
MOWER
Be sure tractor
is on level surface
and
engage
parking
brake.
1. Lower attachment
lift lever to it's lowest
_
position.
CAUTION:
Lift lever is spring loaded.
Have a tight grip on lift lever, lower it
slowly and engage
in lowest position.
2,
Turn tractor steering
wheel to the left
as far as it will go and position
mower
on right side of tractor with deflector
shield to the right.
20
Publicidad
