Publicidad
Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING
CHART:
See appropriate
section
in manual
unless
directed
to a service
center
)ROBLEM
CAUSE
CORRECTION
Loss of power
continued)
Excessive
vibration
Engine
dies when
tractor
is shifted
into reverse
Engine
continues
to run when
operator
leaves
seat with
attachment
clutch engaged
Poor cut - uneven
6.
Faulty spark plug,
7,
Dirty fuel filter.
8.
Stale or dirty fuel
9. Water in fuel.
10.Spark
plug wire loose.
11, Dirty engine
air screen/fins_
12. Dirty/clogged
muffler.
13. Loose or damaged
wiring.
14. Carburetor
out of adjustment.
t 5. Engine valves out of
adjustment.
1o Worn, bent or loose blade.
2.
Bent blade mandrel.
3.
Looseldamaged
part(s).
Reverse
operation
system
(ROS) is not "ON" while
mower or other attachment
is engaged.
1.
Faulty operator-safety
presence
control system.
2,
3.
4.
5,
Worn, bent or loose blade,
Mower deck net level,
Buildup of grass, leaves, and
trash under mower.
Bent blade mandrel.
Clogged
mower deck vent
from build-up of grass, leaves,
and trash around mandrels.
6. Clean
and regap or change
spark plug.
7,
Replace
fuel filter.
8,
Empty fuel tank and refill tank
with fresh, clean gasoline.
9.
Empty fuel tank and carbure-
tor, refill tank with fresh gas-
oline and replace fuel filter,
10. Connect
and tighten
spark
plug wire°
t 1 ,Clean
engine air screenlfinso
12, Clean/replace
muffler°
13.Check
all wiring.
14. See "To Adjust Carburetor"
in Service
and Adjustments
section,
i5. Contact
a qualified
service
center,
1, Replace
blade, Tighten
blade
bolt,
2,
Contact
a qualified
service
center.
3.
Tighten
loose part(s),
Replace
damaged
parts.
Turn ignition
key to
ROS "ON" position.
See Operation
section,
Check wiring,
switches
and
connections.
If not corrected,
contact
a qualified
service
center,
1, Replace
blade,, Tighten
blade
bolt,
2.
Level mower deck.
3. Clean
underside
of mower
housing.
4. Contact
a qualified
service
center,
5. Clean
around mandrels
to
open vent holes.
29
Publicidad
