Publicidad
Idiomas disponibles
Idiomas disponibles
Operation
NOWTO
USEYOUR
PRESSURE WASHER
If you have any proNems operating your pressure washer,
pHeasecall the pressure washer heHpHine at 1-888-611-6788.
To Start
Pressure
Washer
To start your pressure washer for the first time, follow
these
instructions
step-by-step.This
starting
information
aHso appHies if you have Het the pressure
washer
sit idHe for
at Heast a day.
H. PHace pressure
washer
near an outside
water
source
capaHe
of suppHyin 8 water
at a flow rate greater
than
3.7 gallons per minute and no Hess than 20 PSI at
pressure
washer
end of garden hose.
2.
Check
that hish pressure
hose is connected
to spray
sun and to pump. See "Preparin 8 Pressure
_A/asher for
Use" for illustrations.
3.
Hake
sure
unit is in a level
position.
4.
Connect
8arden
hose
to water
inlet
on pressure
washer
pump.
Turn
ON
water.
6.
Damage to equipment resulting from failure to follow this
instruction will void warranty.
Squeeze
triter
on sun until you have a steady stream
of water.This
purges
pump of air and impurities.
Attach
nozzle extension
to spray sun (Fisure
IO).
Tighten
by hand.
7.
Place colored
quick connect
spray tips in slots on
holder
that's attached
to nozzle extension
(Figure
II).
8.
Choose
spray tip you want to use and insert it into
nozzle extension.
See "How to Use SprayTips"
on
page I O.
9.
Ensase safety latch to spray sun trigger
(Fisure
12).
_
Safety Latch
IO. Move variable
pressure
control
lever to "High"
position, shown
on ensine
as a rabbit (Fisure
13).
0
Publicidad
