Publicidad
Idiomas disponibles
Idiomas disponibles
Renfert GmbH
12.2 Changing ultrasound mode
Dyn (dynamic)
eco
The cleaning duration is set.
Press the Mode button to change the ultrasound mode.
The LED indicator of the set ultrasound mode lights up.
The ultrasound mode has been changed.
12.3 Setting cleaning temperature
For units without heating, go straight to Chapter Starting/stopping ultrasonic cleaning [} 20].
The cleaning duration is set.
The ultrasound mode has been changed, if applicable.
Turn the temperature rotary knob to the required temperature to set the cleaning tem-
perature. The temperature can be set from 30–80 °C in 5 °C increments. The heating
system immediately begins heating up the liquid.
The LED indicator for temperature flashes green until the set temperature is reached.
Heating is on.
The LED indicator for temperature lights up green as soon as the set temperature is
reached. Heating is off.
For even heating of the cleaning liquid, we recommend switching on ultrasonic operation whilst heating up.
CAUTION! As a result of ultrasonic operation, especially in continuous operation, the cleaning
liquid is heated up in addition to heating mode!
Alternatively, stir the cleaning liquid occasionally to achieve even heating.
The cleaning liquid is heated up.
Ultrasonic cleaning can occur at the required temperature.
Easyclean TEC
Used for more intensive cleaning with greater cleaning power.
Used for gentle cleaning and quieter operation.
Operating the unit
19 / 24
Publicidad
