TRAPP TRC-40 Manual De Instrucciones página 34

Use the equipment according to the
 
instructions in this manual. Take in
consideration the working conditions
and the service to be done. Using the
equipment for activities not covered in this
manual may result in dangerous situations.
Clean shredder periodically to avoid
 
buildup of residue.
Using the equipment for activities not
 
covered in this manual may result in
dangerous situations.
The TRC-50 is equipped with a four-
 
cycle explosion motor - It does not use oil
mixed with the gasoline.
The engine do TRC-50 leaves the factory
 
without oil and gasoline.
34
Feeding Funnel Assembly
1
7
6
3
5
4
2
Spare parts - Always call TRAPP technicians
 
for spare parts and maintenance services.
Attention!
Frequently check if all screws are well
tightened. Always keep the blades adjusted to
assure the good performance of the shredder.
Attention!
Whenever cleaning or servicing, make sure
the equipment is off and the blades are still as
they continue to move for some seconds.
Attach the feeding funnel (1) in the body (2),
 
pass the locking pin (3) through the holes of
the feeding funnel (1) and the body (2).
Fix the locking pin (3) with the cotter pin (4).
 
After lock the feeding funnel (1) using the flat
 
washer (5), spring washer (6) and the handle
(7).
www.trapp.com.br