Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING:
SURE THE PLUG IS DISCONNECTED BEFORE CHANGING THE FILTERS.
1. Verify that the power cord is disconnected from the outlet. Make sure that the collection tank is
DO NOT USE THE CARTRIDGE FILTER OR DUST COLLECTION BAG FOR LIQUID
VACUUMING.
OPERATING INSTRUCTIONS: WET VACUUMING
3. The included attachments lock together to prevent them from detaching during use. Connect
the desired attachment onto the end of the hose or extension wand by aligning the tabs and
4. Verify that the switch is in the 'O' OFF position before plugging the power cord into the power
power cord from the outlet.
IMPORTANT! When vacuuming large quantities of liquids, do not immerse the nozzle completely
capacity. You will notice an increase in motor speed. When this happens, turn off the machine,
disconnect from power supply, and drain the liquid into a suitable receptacle or drain. To continue
off and remove plug from power supply. Empty the collection tank, clean, and dry the inside and
outside before storage.
REMEMBER!
must be installed before dry vacuuming again.
DO NOT PLUG THE POWER CORD INTO THE POWER OUTLET. MAKE
11
Publicidad
