Publicidad
Idiomas disponibles
Idiomas disponibles
GENERAL ASSEMBLY INSTRUCTIONS
A Phillips head screw driver is required.
1
2
7
8
13
14
WARNING:
SURE THE PLUG IS DISCONNECTED BEFORE ASSEMBLING THE WET/DRY VACUUM.
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT EXPOSE TO RAIN.
UNPACKING YOUR WET/DRY VACUUM & GENERAL ASSEMBLY
4. Remove the contents from inside the collection tank; make sure you have all contents as listed
NOTE: The dust collection bag is for dry pick-up only.
9. Position the hose storage rack as illustrated. Insert one side of the rack into the channel
making sure it is secured in place. Squeeze in the other end and insert it into the
11. Insert the handle into the slots located on the top of the powerhead and secure it with the
12. Insert the locking end of the hose into the vacuum port on the collection tank and turn
13. The included attachments lock together to prevent them from detaching during use. Connect
the desired attachment onto the end of the hose or extension wand by aligning the tabs and
3
9
15
DO NOT PLUG THE POWER CORD INTO A POWER OUTLET. MAKE
4
5
10
11
16
8
6
12
1
1
2
2
Publicidad
