Publicidad
Idiomas disponibles
Idiomas disponibles
1
2
7
8
This Wet/Dry Vac has blowing capabilities. To use the blower feature, follow the instructions listed
below.
WARNING:
IN CANADA, CSAZ94.3) BEFORE USING BLOWER.
CAUTION:
WARNING:
INHALED.
2. Make sure the collection tank is empty before using as a blower. Clear all dirt and debris from
the hose and collection tank.
3. Remove the hose from the vacuum port. Remove the noise diffuser from the blower port.
4. Insert the locking end of the hose into the blower port on the back of the powerhead and lock
5. The included attachments lock together to prevent them from detaching during use. Connect
the desired attachment onto the end of the hose or extension wand by aligning the tabs and
6. Verify that the switch is in the 'O' OFF position before plugging the power cord into the power
8. The unit will now blow through the vacuum hose and can be used to clear obstructions within
BLOWER OPERATION
3
ALWAYS WEAR SAFETY GOGGLES COMPLYING WITH ANSI Z87.1 (OR
KEEP BYSTANDERS CLEAR FROM BLOWING DEBRIS.
WEAR A DUST MASK IF BLOWING CREATES DUST THAT MIGHT BE
5
4
12
6
Publicidad
