6.3 Sanitising
Refer to figure ¢5 on the foldout pages.
Sanitise on stovetop
(before first use and once per day after use)
1. Cover the disassembled, washed parts, except for the tubing,
with plenty of water and boil at least for 10 minutes. Ensure that
the parts are not in direct contact with the bottom of the pot.
2. Drying: Allow to air dry on a clean, unused dish towel or paper
towel. Do not store parts in an airtight container/bag if moist. It
is important that all residual moisture dries.
6.4 Cleaning the motor unit
Supplies needed:
• Drinking-quality water
• Dish soap
• Clean dish towel or paper towel
CAUTION
To prevent electric shock and damage to the
material:
• Unplug the breast pump before cleaning the
motor unit.
• Do not immerse the motor unit in water; do not
run water over the motor unit.
or
10 min
Parts needed:
• Motor unit
Sanitise in microwave
(once per day after use)
1. Use Quick Clean
* bags in the microwave in accordance with the
™
instructions on the bags. (*Refer to local website/shops for
availability in your country.)
2. Drying: Allow to air dry on a clean, unused dish towel or paper
towel. Do not store parts in an airtight container/bag if moist. It is
important that all residual moisture dries.
NOTICE
• Do not spray or pour liquid directly onto the pump.
1. Switch the breast pump off.
2. Unplug the breast pump from the power source.
3. Wipe the motor unit with a clean towel moistened with soapy water.
4. Wipe the motor unit dry with a clean, dry towel.
10