Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
DIODE TEST
1. Insert RED test lead into VΩ jack
COM jack
Diode-Test
2. Touch test leads to diode. A reading of 200-800mV on display
indicates forward bias, "OL" indicates reverse bias. An open
device will show "OL" in both polarities. A shorted device will
show approximately 0mV.
Black lead Red lead
BATTERY REPLACEMENT
When
indicator is displayed on LCD, batteries must be replaced.
1. Remove screw from battery door.
2. Replace 2 x AAA batteries (note proper polarity).
3. Replace battery door and fasten
securely with screw.
To avoid risk of electric shock, disconnect leads from any voltage
source before removing battery door.
To avoid risk of electric shock, do not operate meter while
battery door is removed.
OPERATING INSTRUCTIONS
, and rotate function selector switch
4
setting.
MAINTENANCE
, and BLACK test lead into
5
to the
2
13
Publicidad
Tabla de contenido
