Field Of Use; Handling And Unpacking; General Warnings; Unpacking - Orved CUISSON SV-31 Manual De Uso

EN

HANDLING AND UNPACKING

3.2

FIELD OF USE

The Vacuum packaging machine is designed and constructed for creating vacuum in bags and rigid containers.
The machine must not be used in other ways or for purposes other than that indicated by the manufacturer in this Manual. Conformant use of the
machine also involves abiding by and understanding the warnings and notices in this instruction Manual, as well as prompt checking, maintenance
and cleaning operations.
DANGER! The manufacturer declines all responsibility for damage to persons, animals and objects deriving from non
conforming use of the machine.
4. HANDLING AND UNPACKING
4.1

GENERAL WARNINGS

Pay attention to metal tips, nails, rivets, sharp edges and everything else that could be a potential source of risk on the packing. On receiving the
machine, the Client must check to make sure it is intact, and inform the haulage contractor, or the transport personnel immediately of problems, missing
parts or evident damage; this must be done before proceeding with other handling or unpacking operations.
WARNING: Damage, if any, on the packing may mean possible damage to the machine or its parts; in case of doubt
regarding the actual condition of the machine following transport, contact the manufacturer for information, before
carrying out any other operation.
WARNING: The packed machine must be kept in a safe, dry place, covered and protected from environmental agents. The
storage area temperature must be between 5°C and 40°C and the relative humidity not more than80%.
4.2

UNPACKING

After removing the packing, check to make sure the machine is intact; do not use it if in doubt and contact the dealer immediately. The packaging
materials (plastic bags, etc.), must be kept out of the reach of children, and not dumped in the environment. Keep the packaging materials for future
handling or storage of the machine.
WARNING: Disposal of the packing materials must be done in accordance with the Directives on the matter applicable in the
country in which the machine is installed.
4.3

HANDLING AND STORAGE

- In case of transport within the installation area, the machine must always be kept in the horizontal position to avoid oil leaks from the pump. The
sealing bars and insertion plates must be fixed to prevent their shifting inside the vacuum chamber.
- In case of storage:
The machine must be stored in a safe place, suitable for the purpose, dry, ventilated, covered, and sheltered from atmospheric agents. The storage
area temperature must be between 5°C and 40°C with a relative humidity value not higher than 80%. The installation area must be free of water
and water vapour.
If a machine has remained unused for long periods, change the pump oil before re-using it, by following the instructions
given in the "MAINTENANCE" chapter.
5.

INSTALLATION

5.1

APPLIANCE DESCRIPTION

CUISSON domed vacuum packer machines are suitable for packing to pack both dry and/or seasoned products, as well as liquids, thanks to
the shape and structure of the vacuum chamber which allows bags containing liquid products to be positioned vertically. Furthermore it can
print the bag with the date and batch number. The appliance is equipped with digital controls with vacuum sensor control and has ten
programmes which can be set by the user.
The machine is made up of the following main parts:
• a stainless steel compartment (A) (vacuum chamber or "cave"), equipped with a vertical compartment for packing bags containing liquids (B),
inside of which the vacuum is created and sealing of the bag is performed by a sealing bar (C). The vacuum chamber is equipped with a
transparent openable, Plexiglas lid (D), through which the work phases can be observed. The internal depth of the horizontal and vertical
compartments can be adjusted using special plastic shelves (E). The compartment is also equipped with a device (dater) (F) for printing the date
EN
and batch number on the bags.
• a stainless steel body (G). The control panel and power switch are located on the front of the body while the rear is closed by a stainless steel
panel (H).
Pump oil can be topped up through the left-hand side panel (I - SV-41) and the rear of the machine (SV-31 Fig. 1). The union for connecting the
gas canisters is located on the rear of the unit (left-hand side) (L - SV-41 Fig. 2) and in the centre (SV-31 Fig. 1);
• a high-performance, 25-m
• an air suction system made up of connectors, tubes and solenoid valves which connect the vacuum chamber to the pump and components which
regulate and/or control the system;
• an electrical system including an electronic power board with fuse holders, control and connection board (O). All functions are controlled by a
microprocessor.
Operation and maintenance manual / Ed. 11 - 2008
/h vacuum pump (M) with recirculating oil and an inspection window (N) for checking the oil level.
3
CUISSON SV-31 • SV-41
36
REV. 01 - Cod.: 1500288