TRAPP TRF 50 Manual De Instrucciones página 62

Fig. 5
Fig. 6
Never start or leave the engine running in a
 
confided area or without proper ventilation. The
gas from the exhaust contains carbon monoxide
which is inodorous and lethal.
This shredder is provided with a four-cycle motor
 
and there is no oil added to the gasoline (for
shredders with motor).
Before operating, make sure the crankcase oil
 
level is right.
13
The motor leaves factory with neither oil nor fuel.
 
3
Never store the equipment with gasoline in the
 
tank. If necessary, keep the motor running until it
shuts itself off due to lack of fuel.
62
TRF 80G and TRF 300G
Important Recommendations
Tichtening of screws
Due to the impact and constant vibrations
caused by chopping and grinding of materials,
it is a natural tendency for screws to loosen.
Check them periodically, and if necessary
tighten the loose screws. Be careful not to
overtighten as they may strip.
Attention!
Always turn off shredder and unplug it before
servicing or cleaning.
Never service the shredder with the motor on.
 
For any kind of maintenance the spark plug must
 
be disconnected.
Do not use the fuel injector when the engine is
 
already warm.
Warm the motor up before operating the shredder.
 
Caution: gasoline is highly flammable.
 
Turn off the motor before removing the fuel cap.
 
Do not add gasoline when the motor is running
 
or still hot.
www.trapp.com.br