TRAPP TRF 50 Manual De Instrucciones página 64

Attention!
If motor is hot when changing oil, be careful to
remove oil container. Hot oil is released with
more pressure, and may cause burns.
4. When oil has been fully drained, screw back oil
container.
5. Remove cover (1) and fill up with oil. Replace
cover.
1
64
6. Check the level of oil with indicating rod (2). For
ATTENTION!
Use
!
TRAPP ORIGINAL
PARTS.
TRAPP does not undertake
responsibility for eventual
damages caused to the
equipment, neither for
accidents that may occur
due to the use of non-
original parts.
better reading, firmly hold cover on tube before
removing the rod. Keep oil at rod " Full " level.
Note:
Frequently check level of motor oil to
 
prevent damage due to lack of oil.
www.trapp.com.br
2