Specifications; Nail Selection - Hitachi Koki NT50AGF Manual De Instrucciones

SPECIFICATIONS

Model
Operating Pressure
Actuation
Dimensions
Length x Height x Width
Weight
Nail Capacity
Air Consumption
Air Inlet

NAIL SELECTION

Only nails shown in the table below can be driven with this Nailer.
Be sure to use only the genuine HITACHI fasteners for the NT50AGF.
The use of any other nails can result in tool malfunction and/or
nail breakdown, leading to serious injuries.
16 gauge
T flooring nails
NT50AGF
90-115 psi (6.2-7.9 bar
6.3-8.1 kgf/cm2)
Hammer Actuated with Safety
Interlock
20" x 19" x 3"
(508 mm x 483 mm x 76 mm)
13 lbs (5.9 kg)
175 Nails
.064 ft3/cycle @ 90 psi
(1.81 ltr/cycle @ 6.2 bar)
(1.81 ltr/cycle @ 6.3 kgf/cm2)
3/8" NPT Thread
WARNING
Min.
.06"(1.53mm)
.23"(5.80mm)
— 11 —
English
Max.