Horizon Fitness EX-59 Manual Del Propietário página 6

ASSEMBLY STEP 5
RUBBER FLAT WASHER (Q)
WASHER (P) 25 mm
26 mm Qty: 4
Qty: 2
CONSOLE MAST
RUBBER WASHER (P)
10
EX-59-CE5.2-OM-rev1.2.indd 10-11
HARDWARE BAG 5 CONTENTS :
FLAT WASHER (H) SPRING WASHER (B)
20 mm 15 mm
Qty: 4 Qty: 2
Open hardware bag 5.
A
Slide 1 rubber washer (p), 1 flat
B
washer (Q) onto the console mast.
Slide lower handlebar onto console
C
mast and attach using 1 flat washer (Q),
FLAT WASHERS (Q)
1 flat washer (h), 1 handlebar cap, 1
FLAT WASHERS (H)
flat washer (h), 1 spring washer (b)
BOLT (R)
and 1 bolt (r).
Repeat steps B–C on the opposite side of the
D
elliptical.
HANDLEBAR
CAP
SPRING
WASHER (B)
LOWER HANDLEBAR
ASSEMBLY STEP 6
BOLT (R)
20 mm
Qty: 2
LOWER LINK ARM
TEFLON WASHERS (S)
HARDWARE BAG 6 CONTENTS :
TEFLON
FLAT WASHER (T)
WASHER (S)
17 mm
28.4 mm
Qty: 2
Qty: 4
Open hardware bag 6.
A
Align end of lower linK arm with bracket on
B
bottom of lower handlebar.
Place teflon washers (s) on both sides of
C
the lower linK arm. While holding teflon
NUT (V) washers (s) slide lower linK arm into
bottom end of lower handlebar.
LOWER HANDLEBAR
FLAT WASHER (T)
Secure the joint with 1 flat washer (t), 1
D
SPRING WASHER (B)
spring washer (b),1 bolt (u) and secure
with 1 nut (v).
BOLT (U)
Repeat steps B–D on the opposite side of the
E
elliptical.
SPRING WASHER (B)
15 mm
Qty: 2
BOLT (U) NUT (V)
70 mm Qty: 2
Qty: 2
11
7/6/10 4:33 PM