Publicidad
Idiomas disponibles
Idiomas disponibles
4 Safety Precautions
– The saw is clean.
– The chain catcher is not damaged.
– Chain brake is operating properly.
– The controls function properly and have not been
modified.
– Chain lubrication is operating properly.
– Wear marks on chain sprocket are not deeper than 0.5
mm.
– A combination of guide bar and saw chain recommended
in this instruction manual is mounted.
– The guide bar and chain are properly mounted.
– The chain is properly tensioned.
– Only original STIHL accessories designed for this saw are
fitted.
– Accessories are properly mounted.
– The oil tank is closed.
WARNING
￭ If components do not comply with safety requirements,
they will no longer function properly and safety devices
may be rendered inoperative. This can result in serious or
fatal injuries.
► Work only with an undamaged chainsaw.
► If the saw is dirty: Clean the saw.
► Work only with an undamaged chain catcher.
► Never modify your chainsaw. Exception: Mounting a
combination of guide bar and saw chain recommended
in this instruction manual.
► If the controls do not function properly: Do not use your
saw.
► Only fit original STIHL accessories designed for this
saw model.
► Mount the guide bar and chain as described in this
instruction manual.
0458-795-9921-A
► Mount accessories as described in this instruction
manual or the instructions supplied with the accessory.
► Never insert objects in the saw's openings.
► If you have any queries: Contact your STIHL servicing
dealer for assistance.
4.6.2
Guide Bar
The guide bar is in a safe condition if the following points are
observed:
– Guide bar is not damaged.
– Guide bar is not deformed.
– The minimum groove depth is maintained, @ 19.3.
– Bar rails are free from burrs.
– Bar groove is not pinched or splayed.
WARNING
￭ If the guide bar is not in a safe condition, it can no longer
support and guide the saw chain properly. The rotating
saw chain can jump off the guide bar. This can result in
serious or fatal injuries.
► Work only with an undamaged guide bar.
► If the groove depth is less than the minimum depth:
Mount a new guide bar.
► Deburr the guide bar every week.
► If you have any queries: Contact your STIHL servicing
dealer.
4.6.3
Saw Chain
The saw chain is in a safe condition if the following points
are observed:
– Chain is not damaged.
– Chain is properly sharpened.
– The service marks on the cutters are still visible.
English
51
Publicidad
