Publicidad
Idiomas disponibles
Idiomas disponibles
7 Engaging and Disengaging the Chain Brake
► Check to see if the oil tank cap can be pulled upwards and
off.
► If the oil tank cap cannot be pulled upwards and off: Fold
down the grip on the oil tank cap.
The oil tank is closed.
If the oil tank cap can be pulled upwards and off, perform the
following steps:
► Place the oil tank cap in the filler opening – in any position.
► Press the cap down and rotate it clockwise as far as stop.
► Press the cap down and rotate it counterclockwise until
mark (1) points to mark (2).
► Now try again to close the oil tank.
► If the oil tank still cannot be closed properly: Do not use
the chainsaw and contact a STIHL dealer for assistance.
The chainsaw is not in a safe condition.
7 Engaging and Disengaging the Chain
Brake
7.1
Engaging the Chain Brake
The saw is equipped with a chain brake.
The chain brake is activated by the inertia of the front hand
guard if the kickback force is high enough or can be engaged
by the operator.
0458-795-9921-A
► Push the hand guard away from the front handle with your
1
left hand.
The hand guard engages with an audible click. The chain
brake is engaged.
7.2
Disengaging the Chain Brake
2
► Pull the hand guard toward the front handle with your left
hand.
The hand guard engages with an audible click. The chain
brake is disengaged.
8 Removing and Fitting the Battery
8.1
Fitting the Battery
► Engage the chain brake.
English
61
Publicidad
