Shallow Water Operation - TOHATSU M 9.9D2 Manual Del Propietário

ENOM00063-0
Tilt down
Pull the reverse lock lever upward until it
stops. (This is the tilt down position.) Now,
lift up the outboard motor slightly, and
then allow gravity to lower it for you.
3
2
1. Reverse lock lever
2. Tilt up position
3. Tilt down position
ENOM00068-A

9. Shallow water operation

ENOW00051-0
WARNING
During shallow water operation, be careful
not to place your hand between the swivel
bracket and the clamp bracket. Be sure to
tilt the outboard motor down slowly.
ENOW00053-0
While in shallow water drive position, do
not operate the outboard motor in Reverse.
Operate the outboard motor at slow speed
and keep the cooling water intake sub-
merged.
ENOW00054-0
ENOF01726-0
Do not overtilt outboard motor when driv-
ing shallow water, or air may be sucked
through water inlet and sub-water inlet,
potentially leading to engine overheating.
1
1. Water inlet
2. Sub-water inlet
ENOF01725-0
Manual tilt type
1. Shallow water running position:
Put the reverse lock lever in the tilt up
position, and tilt up the outboard motor
to put the outboard motor in the shal-
low water running position.
ENGINE OPERATION
CAUTION
CAUTION
2
1
45
7
ENOF01144-0