With your drawer slides attached to the cabinet extend the inside
arm of your drawer slides on both sides.
Separate the inside arm of your drawer slide by pressing up on
the plastic lever on the slide on the right and down on the lever
on the slide on the left. Keep the inner slides together as you
separate them.
Repeat drawer slide separation for remaining drawer slide.
MEDIUM TOP DRAWER
Assemble slides to the medium top drawer by attaching 2 of the
inside arms of the drawer slide that you removed to either side of
the outside of the drawer.
Attach with 8 bolts (T) - 4 on each side, as shown. Finger tighten
until all bolts are in place. When bolts are all in place-tighten
them (do not over tighten). Make sure the solid edge of the
drawer slide is at the front of the drawer and the end with the
cutout is at the back of the drawer.
LARGE MIDDLE DRAWER
Assemble slides to the Large Middle drawer by attaching 2 of
the inside arms of the drawer slide that you removed to the top
rail of either side of the outside of the drawer. Attach with 8 bolts
(T) - 4 on each side, as shown. Finger tighten until all bolts are
in place. When bolts are all in place-tighten them (do not over
tighten). Make sure the solid edge of the drawer slide is at the
front of the drawer and the end with the cutout is at the back of
the drawer.
10 | www.bluesk youtdoorliving.com