Blue Sky Outdoor Living OKC3024GDR1DG Manual Del Propietário página 9

DRAWER SLIDE ASSEMBLY
CAUTION! DRAWER SLIDES ARE GREASED AND CAN LEAVE
RESIDUE.
Before attaching slides to the cabinet make sure the inside arm is
pushed and locked all the way back exposing the front through holes
as shown. Repeat for all slides before next step.
Assemble the top drawer slides by attaching 2 of the drawer slides
(N) on to the top slide location of the inside of the cabinet on each
side of the cabinet using 12 bolts (T)- 1 drawer slide and 6 bolts on
each side. Finger tighten until all bolts are in place. When bolts are
all in place-tighten them with provided hex key (do not over tighten).
If assembling a 3 Drawer unit continue attaching remaining slides to
the cabinet. Note the assembly location of remaining slides.
Assemble the middle drawer slides by attaching 2 of the drawer
slides (N) on to the 2nd highest slide location of the inside of the
cabinet on each side of the cabinet using 12 bolts (T) - 1 drawer slide
and 6 bolts on each side. Finger tighten until all bolts are in place.
When bolts are all in place-tighten them with provided hex key (do
not over tighten).
Assemble the bottom drawer slides by attaching the remaining 2
drawer slides (N) to the lowest slide location of the inside of the
cabinet on each side of the cabinet using 12 bolts (T) - 1 drawer slide
and 6 bolts on each side. Finger tighten until all bolts are in place.
When bolts are all in place-tighten them with provided hex key (do
not over tighten).
9 | www.bluesk youtdoorliving.com