Publicidad
Idiomas disponibles
Idiomas disponibles
Attach the cabinet body to the base by using 6 of the
bolts (R) - 3 in the front and 3 in the back of the cabinet.
Finger tighten until all bolts have been threaded in the
nuts that have already been welded into the bottom of
the cabinet. When the bolts are all in place - tighten them
with provided hex key or drill bit with extender (do not
over tighten).
With two people, turn the cabinet upside down. There are
2 locations on each side of the bottom of the cabinet that
need to be secured to the base. Finger tighten all 4 bolts
(R). When the 4 bolts are in place-tighten them (do not
over tighten). With two people, turn the cabinet upright.
Check to make sure the cabinet is still level.
Assembly of the Base Cabinet is complete. Continue
with the instructions related to the cabinet you are
assembling.
CABINETS WITH SHELVES
(IF YOUR UNIT DOES NOT HAVE A SHELF CONTINUE
TO NEXT STEP)
It is easier to set your shelf location with the top off.
Place the self brackets (D) to the desired location by
slipping them in the slots in the corners of the cabinet
body. The open hook should be facing up towards the top
of the cabinet.
Slide the shelf (E or ES) in place to make sure it is in the
desired location. If you are installing the ES shelf for the
sink cabinet, the open slot should be positioned in the
back of the cabinet to accommodate pluming hoses and
drains. Then remove the shelf. It will make it easier to
install the top. Reinstall the shelf after the top is installed.
ATTACH THE TOP USING TOP MANUAL (TOP SOLD
SEPARATELY)
7 | www.bluesk youtdoorliving.com
Publicidad
