Thermador Masterpiece Serie Guia De Instalacion página 18

en-us Prior to installation
Remove the bottom hinge oven door prior to installation
¡
to access the necessary lifting points and to significantly
reduce the unit weight. For double ovens with bottom
hinge doors, you can remove both oven doors.
→ "Removing the oven door from bottom hinge
conventional ovens", Page 20
The oven can be difficult for two people to handle during
¡
installation. It is recommended to have three or more
people available to assist with lifting the unit into place.
There is a ridge across the top front of the oven cavity.
¡
Lift by grasping this ridge with one hand while placing
the other hand on the back of the unit. If a third helper is
lifting from the front, both hands should lift by holding
this ridge area.
→ "Lifting points", Page 18
The recommended lifting method depends on the oven
¡
door type.
Lifting points
The persons lifting the appliance should stand on either
side of the oven, using the lifting points specified in the
chart and illustrations. A third person helping to lift the unit
should stand in front of the oven, facing the oven cavity.
Note: The lifting points are shown with the door removed.
Lifting Description
points
a Front location of the hand for the helpers
lifting from the sides of the unit
b Back location of the hand for the helpers
lifting from the sides of the unit
c Location for a third person to help lift the unit
18
Double or combination ovens with bottom hinge door
Double or combination ovens with side hinge door
Single ovens with bottom or side hinge door
6.2 Assembly of the two combination oven
units
Secure the microwave, speed oven or steam convection
oven on top of the lower oven, before you place the oven
into the wall cabinet.
Prepare the required installation parts.
¡
The universal connector brackets are interchangeable
¡
for the left and right sides of the oven. Be sure the taller
vertical edge of the bracket is positioned to the outside
of the oven.