REMOVABLE
OVEN RACKS
BUMPED-IN
RACK GUIDES
Be carefu!
not to scratch
the
oven finish
when
installing
or removing
oven racks.
To install:
1. Set the raised back edge of the rack on a pair of rack
guides.
2. Push the rack in until you reach the bump In the rack
guide, then lift the front of the rack and push the rack
all the way in.
To remove:
1. Pull the oven rack out, then up.
NOTE:
The
racks
are designed
w_th stop Rocks.
When
the
racks
are placed
correctly
on the
rack
sup-
port and extended
from the oven,
the
stop lock
prevents
the
racks
from
SiSting when
you are
removing
food from
the racks
or placing
food
on
them.
REMOVABLE
OVEN
DOOR
BROIL STOP
POSITION
TO remove:
1. Open the door to the stop position (see illustration).
2. Grasp the door at each side and lift up and off the
hinges. DO NOT lift the door by the handle.
NOTE:
When Lhe door is removed
and hinge arms
are at stop position,
do not bump
or try to move
the
hinge
arms.
The
hinges
could
snap
hack
causing
an injury
to the hands
or damage
to the
porcelain
on the
front
oR the range.
Cover
the
hinges
with toweling
or empty
tawe!
rolls while
working
in the oven area.
To replace:
1. Hold the door over the hinges with the slots at the
bottom edge of the door ,ned up with the hinges.
The
hinge
arms
must
still
he
in the
stop
posiUon.
2. Slide the door down onto the hinges as far as it will
go and close the door.
REMOVABLE
STORAGE
DRAWER
E_
STOP
This
drawer
gives
you
space
for
keeping
cookware
and bakeware.
PaasticsandtBammable
nmteriai
should
not be kept
in this
drawer,
Do not overload the storage drawer, if the drawer Is too
heavy, It may slip off the track when opened. To open the
drawer, grasp the center of the handle and pull straight
out.
To remove:
Pull drawer straight out and lift over the
guide stops.
To replace:
Lift over the guide stops and sltde drawer
into place.
19
NEMNT116