Publicidad
Idiomas disponibles
Idiomas disponibles
REMOVABLE
KNOBS
MOLDED
RIB
SPRING
CLIP
All control knobs may be removed for easy cleaning by
pulling the knob straight off the stem. Be sure that the
knob is in the OFF position before removal.
Hint: Slip a thin cloth (such as a handkerchief) or a piece
of string under and around the knob edge and pull
straight off.
Caution:
Read these Instructions
carefully before re-
placing the knobs. Replacing the knobs Improperly will
damage the knobs and the spring clips on the stems.
If
this happens, the knobs will fit loosely.
To replace the knob:
1.
The knob stem has a groove
In each side. The
groove on one slde has a spring clip. The other
groove Is clear (see Illustration).
2.
Check the Inside ofthe knob and find the molded rib.
3.
Replace the knob by fitting the molded rib Inside the
knob Into the clear groove on the stem.
Note:
Be sure to replace
knobs
on the
correct
stems,
REPLACING
THE
OVEN
LIGHT
GLASS
RETAINER
BULB/__'_"_.
COVER
Be sure that the light
switch
is in the off position.
Do not touch
hot oven
bulb.
Do not touch
oven
bulb with wet hands.
Do not wipe oven light area
with wet cloth.
Never
touch
the electrically
live
collar
on the
bulb when
replacing
it,
Electrical
power
must be shut off if you have
to
replace
a broken
bulb,
1.
Unscrew glass cover and remove.
2,
Replace the bulb with a 40 watt appliance bulb.
3,
Replace the cover.
Note:
We recommend you use a 40 watt appliance bulb
that Is no longer than 3 1/2".
20
NEMNT96
Publicidad
