Kenmore 95846 Manual De Uso Y Cuidado página 9

TO START THINGS COOKING
COOKTOP COOKING
Before you use t he cooktop for t he first time, clean It with
cooktop cleaner. This will leave a protective coating of
silicone. The cooking zones are shown by the outlines
on the glass surface of the cooktop.
COOKING ZONES
The sign near each cooktop control knob shows which
element Is turned on by that knob.
To use the large 9" cooking area, push to turn the
control knob to desired setUng and push In the top
portion of the rocker switch next to the control knob.
To use the small 6" cooking area, push tO turn the
control knob to desired setUng and push In the bot-
tom portion of the rocker switch.
OFF
COOKTOP GUIDE TO BASIC SETTINGS
=Hi"
Used for quick starts, such as
bringing water to a boll.
O0 eO O® O0
®0 O0 O0 O®
Left Left Right Right
Front Rear Rear Front
To operate cooktop controas:
=MED.Hr'
Used for frying and rapid boiling.
1. Push to turn°
2. Set on or between
marks for desired
heat.
The Indicator light will glow when any cooking zone Is
activated.
The left front element has two cooking zones:
DUAL COOKING ZONES
(LEFT FRONT ELEMENT ONLY}
9" ZONE FOR LARGE UTENSILS
FOR SMALL UTENSILS
"MED"
Used for slow boll and sautding.
=MED.LO"
Used for cooking foods In small
amounts of water.
'%0"
Used for steaming foods or keep-
Ing foods at serving temperature.
When a cooking zone surface is activated, coils beneath
the zone radiate heat through the glass to the utensil.
The red glow of the coils will be visible through the
glass. It will take the cooking zone surface a few
moments to heat up. The coil cycles on and off to
maintain your selected control setting.
See the Cleaning Tips for important information
about maintaining your cooktop.
7 NEMTC57