Beha-Amprobe MT204-S Manual Del Usuario página 35

Memory features
Any memory address consists of a customer name, machine name and
location name. The memory address should be entered / selected before
storing measurement results. Date and operator must be entered before
carrying out the measurements as they are attached to any measurement
result immediately after finishing the measurement.
Memory structure
Measurement result, limit value and parameters are saved to selected
memory address upon receiving the SAVE command. The following
structure of the memory address is offered:
Figure 22: Storage structure
CUS: Customer (max. 17 characters)
MAC: Machine (max. 17 characters)
LOC: Location (max. 17 characters)
NO.: Measurement no. of the test within address "Location" (max. 3 fig.)
• The date and operator are attached to any measurement result
automatically after finishing the measurement.
• In Software es control the field "CUS" (customer) is assigned to
and the field "MAC" (machine) is assigned to "Appliance". The fields
"LOC" (location) and "NO." (measurement number) are joint together,
hyphenated and entered into column "Loc-No." to each test step.
35
"Client"