Publicidad
Idiomas disponibles
Idiomas disponibles
Fuse replacement (fuse F3 for R
Internal fuse F3 (FF 1.0 A / 500 V, 6.3 x 32 mm) has blown if:
• Text "FUSE (F3) 1.0A" appears on the LC-Display in R
• Check the fuse also if "FUSE (F2/F3)" appears on the LC-Display in R
or R
function
PE10A
To replace the fuse proceed as follows:
1) Unlock corresponding fuse holder (4) by using an appropriate
screwdriver
2)
Remove the defective fuse and replace it with a new one (FF 1.0 A /
500 V, 6.3 × 32
3) Lock the fuse holder again.
☞
If any fuse blows several times (for example in case of operating
error) the instrument must be sent in to the service department in
order to be checked.
mm).
43
function)
PE0.2A
PE0.2A
function
PE0.2A
Publicidad
