Submenu For Setting The Clock & Daily Event Timers (See Command 02) - FAS FASTER Serie Manual De Instrucciones

30
SUBMENU FOR SETTING THE CLOCK & DAILY EVENT TIMERS (SEE COMMAND 02)
9.2
Alarm set 01 Sets the year/month/day:
This command is used to set the year, month and day on the clock in the control board. The introduction
format is YYMMDD.
Alarm set 02 Sets the hour and minute:
This command is used to set the clock on the control board. Enter the correct hour and minute values and
press ENTER to memorise it. Then, enter 1 to have the clock appear on the display, otherwise enter 0.
Alarm set 03 Setting the days of the week:
This command is used to set the day on the clock which is present on the control board; the permissible
values are from 1 (Monday) to 7 (Sunday).
Alarm 10 Lighting control setting:
Use this control to set the lighting all off = 0 or, dimming of the lighting = 1 during the energy saving time
E
slots (see Alarm 11). The system then offers the option of switching off the LED when the door is open, 1 =
N
enabled, 0 = not enabled.
G
L
Alarm 11 Lights on/off:
I
With this command 3 daily periods can be programmed for switching the lighting on and off. However, even
S
in the periods when the lighting is programmed off, simply pressing a button on the keyboard or inserting
H
money will activate the lighting for a period of 3' for the vend cycle to take place. If this function is not
required, program 2400 in Alarm 11.
Alarm 21 Setting discount time slots:
With this command you can program 3 daily discount time slots. In the time slots with the discount active the
machine refers to the prices set in the submenu relevant to the discounted prices. Naturally command 62 in
the main menu must be set at 1. If this function is not required, program 2400 in Alarm 21.
Alarm 31 Selections disabled for daily time periods:
This command allow the selections set at command "Alarm 36" to be disabled for 3 time periods per day. If
use of this function is not required, programme 2400 at Alarm 31.
Alarm 36 Setting the selections with timed disabling :
Upon entry to the command the system asks the operator to disable the option that concerns the entire
machine including any slave machines that may be connected (option 1), or not (option 0). If option 0 is
selected, the command allows the operator to choose which selections must be disabled during the time
slots when the "selections disabled" function is enabled (see programming Alarms 31-34).
Example:
To activate the disabled time slot for selection 15 proceed as follows:
1. Programming mode, ......................................................................... Command 00 appears on the display
2. Type 02 and press B, .............................................................................Alarms 00 appears on the display
3. Type 36 and press B, , ...............................................................Select. number 00 appears on the display
4. Type 15 and press B, , ...................................................................... Dis./En.1/0 N appears on the display
5. Set the value 1 and press B.
N.B.: With SPIRALI SLAVE connection enabled (see command 49), once the settings for the MASTER
machine have been completed, access is gained to the setting mode for the same parameters relevant to
the SLAVE machine by simply pressing the A (ESC) button.
www.vendival.com Telf. 902 07 07 59 - Whatsapp 615 35 50 96
FASTER – Issue 02