Emmaljunga Sento MAX Manual De Instrucciones página 38

WARNING
• 4. Always use the carrycot lifting
handle as illustrated. This is very
important!
• Never leave the carrycot near the
stairs, on the top of a table or in
places where it can fall off.
• Do not use the carrycot as a cradle
outdoors or on uneven surfaces.
• Do not use the carrycot as a bed for
your child.
• 4. Never lift the carrycot with the
lifting handle as illustrated. This is very
important!
3) Insect net
1. Attach the Insect net using the zip on
the edge of the hood.
2. To secure the insect net fasten the
press stud to the inside of the hood.
Repeat on the other side.
4) Folding the carrycot
Remove the mattress.Pull the bar using
the easy pull handle along the bottom of
the carrycot. Repeat both in the foot end
and the head end.
Seat unit (ERGO & FLAT)
1) Assembly of the seat unit
ERGO
1. Seat Frame. Press both buttons on the
sides of the footrest to unfold.
2. Fold out both seat attachments.
3. Place the seat fabric cover over the top
edge of the seat frame.
4. - 4.1 Thread the harness strap through
the seat fabric and then place the seat
fabric around the seat plate. Close
the fabric underneath the seat with the
Velcro.
5. Position the safety straps around the
frame and click into the buckle on the
back of the backrest. Repeat on the
left and right side of the frame.
6. Fasten the press studs that secure the
38
fabrics to the frame on both sides.
7. Click the back rest adjustment handle
into the bracket on both sides.
8. Thread the strap through the hole in
the fabric and fasten around the back
rest adjustment handle with the press
stud.
9. Insert the bumper bar into the brackets
on both sides of the seat unit.
10. Fasten the crotch strap around the
front bar.
11. Attach the hood onto the seat frame
tubes at both sides. WARNING - Pinch
point - Danger of trapping.
12. Pull the fabric over the top of the seat
frame and secure with the lower press
stud. Repeat for the left and right sides.
Please note: If the hood moves up and
down on the seat frame tube this can
cause scratches. Ensure the seat frame
tube is free from dust and dirt.
FLAT
1. The seat unit is delivered fully
assembled. Only the bumper bar and
the hood need to be assembled. Insert
the bumper bar into the brackets on
both sides of the seat until you hear a
click.
2. Fasten the crotch strap around the
bumper bar.
3. Insert the hood in both sides of the
seat until you hear a click.
4. Secure the back of the hood by
using the 2 hooks. You can click
Emmaljunga's footmuff (accessory) into
place using the eyelets/D-rings behind
the backrest.
WARNING
• Ensure that children are kept away
from all moving parts of the stroller to
avoid risk of injury.
• It is important that the seat unit fabric
is always correctly fitted
• Never use the stroller without making
sure the seat unit fabric is correctly
assembled on the frame first.
• The bumper bar should always be
fitted when using the seat unit.
Sento MAX, Sento LUX V 1.1