Descargar Imprimir esta página

Hupfer CoolMultiMobil Manual De Instrucciones página 56

Ocultar thumbs Ver también para CoolMultiMobil:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 89
Operating instructions
3
Safety information
3.1
Intended use
The CoolMultiMobil is used to keep meal components cold and to
serve meal components in containers or portioned on dishes on trays
or grilles. Depending on the CoolMultiMobil variant, the rail pairs are
suitable for Gastronorm or Euronorm size trays.
Intended use includes following the prescribed procedures, complying
with the given specifications, and using the genuine accessories that
are provided or additionally available. Any other use of the transport
trolley is considered improper.
3.2
Improper use
Loading with warm or hot meal components is regarded as improper
use. The loaded food must not interrupt the air flow of the cooling
system. Trays and containers must be pushed in to the end position.
Objects must not be placed on the inner base of the unit without trays
or grilles. Vents must not be blocked. The unit must not be loaded
without pre-cooling. The unit must not be installed and operated out-
doors.
It may not be used for transporting living creatures. Persons must not
sit or stand on or in the unit.
In the case of improper use, the manufacturer and suppliers shall
assume no liability for resulting damage. Damage caused by improper
use shall result in loss of liability and of guarantee claims.
3.3
Safety instructions
3.3.1 General information
The unit may only be used in a technically sound condition, taking
risks and safety into consideration, for its intended purpose and in
accordance with the operating instructions.
Before each use, the unit must be checked for any visibly apparent
damage and defects. If damage occurs, immediately notify those
responsible and take the unit out of use.
Changes or conversions are only permitted after consultation and
written consent from the manufacturer.
The CoolMultiMobil can move off under its own weight and in an
uncontrolled manner if the wheels are not locked and the direction lock
not engaged.
Secure the stationary CoolMultiMobil with the locks to prevent it from
rolling away.
If the power supply cables are damaged, short circuits and electrical
contact may occur. Do not pull on the cable, grip the mains plug.
Disconnect the unit from the power supply before moving it.
CoolMultiMobil
11 / 39

Publicidad

loading

Productos relacionados para Hupfer CoolMultiMobil

Este manual también es adecuado para:

Cmm 2/26 en ukCmm 2/26 gn uk