Hupfer CoolMultiMobil Manual De Instrucciones página 87

CoolMultiMobil
Central lock tread
Engage
Central direction lock tread
Engage
Cleaning the interior
DANGER
Electrical hazard
Contact with electrical voltage will result in death.
−
Before starting any cleaning and maintenance work, dis-
connect the unit from the mains.
−
Do not clean the unit with steam cleaners or high-pres-
sure cleaners.
CAUTION
Insufficient cooling
If interior components are missing, the cooling will not work
properly.
−
Reinstall all components.
−
Connect the fans to the sockets (step 3).
Release
Release
CAUTION
Sharp edges
There is a risk of being cut on the thin plates of the evapo-
rator (especially in steps 6 and 7).
−
Wear protective gloves.
−
Remove the air baffles on the pin.
−
In the event of injuries, contact the responsible first
aider.
To clean the interior thoroughly, you must remove all the
components from the interior.
1. Disconnect the unit from the power supply.
2. Remove the components in the order shown
(steps 1 to 9).
3. Disconnect the power cables from the fans (step 9).
4. Reinstall the components in the reverse order
(steps 9 to 1).
NOTE: Connect the cables to the fans (step 9).
Video cleaning instructions
The QR code takes you directly to the cleaning video.
1. Scan the CR code or
2. click on the QR code.
You will need an internet connection and possibly an app to
open QR codes. Additional charges may arise depending on
your mobile phone provider.