MSW Motor Technics MSW-PLT-W20 Manual De Instrucciones página 37

EN
ATTENTION!
After turning off the stove, do not immediately disconnect the electricity, the flame will continue to
burn until the pellets in the furnace burn out. The exhaust fan will run during this process. The
process will take 15 minutes.
Timer setting
During the shutdown process, press and hold for a few seconds to set the stove start time
within 12 hours. This means that the stove will start automatically within 12 hours. Press or
� �
to set the time. The display will show as follows:
When the stove is in operating mode, press and hold the button for a few seconds to set the
time for the stove to turn off within 12 hours. This means that the stove will turn off automatically
within 12 hours. Press or to set the time. The display will show as follows:
� �
After setting the on/off time, the clock area will show every 5 seconds how much time is left.
Setting timers on a weekly basis
Press and hold 4 times to start setting the timer on a weekly basis. This function allows you to
set the burning time once or twice a day on selected days of the week and set the time to turn the
stove on/off. The device will automatically turn on and off according to the set time. The numbers 1
to 7 indicate the days of the week, starting from Monday to Sunday. To adjust the time setting, press
Press ◀ or ▶ to switch the time position you want to adjust.
or �.
�
Press ◀ or ▶ to switch the next/last day time setting.
If you need to set a second time for turning the stove on/off, press ◀ and ▶ at the same time, or
after setting the timers for one week, the device will automatically go into the second start time
setting mode. The setting method is the same as above.
Reminder: When using this setting, please take into account random situations that may cause
danger, such as placing flammable objects on the stove, sudden power outage, power failure, etc.