Installation instructions
[] REMOVE
THE FREEZER DOOR
%q_e the door shut
with masking
tape.
I).emoxe
the
hinge
coxer
on top of the fl'eezer
door
(on some
models).
Ilemo_e
the two screws, then lift the hinge straight
ui ) to fl'ee the hinge, pin ti'om the socket in the top
of the doo_:
Remove
the tape and
tilt the door
away fl'om the
cabinet,
i,ifl it off the center
hinge
pin.
Set the door
on a non-scratching
surtace
with
the inside
up.
[] REMOVE THE
FRESH FOOD DOOR
Tape
the door shut
with masking
tape.
tt
Remoxe
the center
hinoe_ pin with a ,/4
socket.
H"
m,
inge_rln7
Remoxe
the
tape
and
tilt the
door
mva} fl'om
the
cabinet,
i,ifl the
door
straight
off the
bottom
hinge
bracket,
Set the door on a non-scratching
sm'face, with the
inside
up.
CAUTION:
Do not let door
drop to the floor.
To do so could
damage
the door stop.
[] TRANSFER
TOP HINGE
TO THE LEFT
Interchange
hinge and screws at top fight with scre_vs
at the top left of cabinet.
See top hinge illustration
in
Step 1.
Do not tighten screws on hinge side at this time.
[] TRANSFER
BOTTOM
HINGE
BRACKET TO THE LEFT
Remo_ e the base ,grille by, ,graslring, it at the bottom
and pulling
it straight
out.
Remoxe
the insert at the top left side of the base grille
and install it on the fight side. You must pull up on
the insert to remoxe
and snap down to replace.
Using a socket
drixe_; moxe the bottom
hinge bracket
ti'om the rioht side to the left side.
19