GE 22 Manual Del Propietario E Instalación página 8

About the shelves and bins.
Sfide-Out Spil/proof Shelf (on some models)
The slide-out spillproof shelf allows you
to reach items stored behind othe_. The
spedal edges are designed to help prevent
spills from dripping
to lower shelves.
Toremove:
0 Remove all items ti'om shell
Slide the shelf out tmfil it stops.
I,iti the fl'ont edge of the shelf tmtil the
central tabs are above the fl'ont bin:
0 Continue pulling the shelf torward
tmtil it can be removed.
To replace:
Place the rear shelf tabs just in ti'ont ot
the central notches on the shelf fi'ame,
Slide the shelf in tmfil the central tabs
are slightly behind the front bin:
I,ower the shelf" into place tmtil it is
horizontal and slide the shelf in.
Make sure that the she/f sits fiat after relbstaiiation
and doesn't move freeiy from side to side.
Make sure you push the shelves a// the way in
before youclose the door
,Fingerhold
,.Snugger
Adjustable Bins on the Door
A(!justable bins can easily be carried ti'om
reflJgerator
to work area.
Toremove: i,ifi bin
straight
up, then
pull out.
TOreplace or relocate: Engage the bin in the
molded supports of the (h)o_; and push in.
Bin will lock in place.
The snuggerhelps prevent tipping, spilling
or sliding of small items stored on the (loot"
shell (h_ii) the finger hold near the rear of
the snugger and move it to fit w)ur needs.
Non-Adjustable Shelves on the Door
Toremove: Lift the shelt straight up, then
pull out.
To replace:Engage the shelf in the rooMed
supports on the door and push down.
It will lock in place.
Freezer Tilt Out Bin (onsomemodels)
Push the button
as you tilt out the bin.
To remove: Hold the sides of the bin and
lift it straight up, then pull out.
To replace:Engage the ends ot the bin in
the molded supports on the door and
push down, ]t will lock in place,
NOTE." Do not overload the bin.