GE 22 Manual Del Propietario E Instalación página 4

About the controlson the refrigerator.
Thecontrols will look like one of the following:
Initially, set the refrigerator control at5 and the freezer control at5
and allow 12-24 hours for the temperature to stabilize.
Several adjustments may be required. Adjust the controls one
increment at a time, and allow 12hours after each adjustment for
the refrigerator to reach the temperature you have set.
Setting the controls to # stops cooling in both the refrigerator and
freezer compartments but does not shut off electrical power to
the refrigerator. On some models, only the refrigerator control has
a 0 setting.
Touchpad controls
* SettingeithercontrolatOwillautomaticallysettheothercontrolatO.
The zeros will blink until you set the controls.
* If both controls are set at 0 and either COLDER pad is pressed, the
controls will automatically reset to 5.
Controlsettings will vary based on personal preferences, usage and
operating conditions and may require more than one adjustment.
Locking the Controls (onsomemodem
This te_mn'e allo_:_ )'(_u to lock tile controls
so tile settings cam_ot be changed.
Tolock the controls:
O Set tile controls to tile desired settings.
0 Press and hold tile lock pad tiw
3 seconds.
When tile controls are locked, tile indicator
light will come on and tile control settings
will not be displ_lyed.
To unlock the controls:
Press and hold tile lock pad %r 3 seconds.
Mter mflocldng tile controls, tile settings
will be displayed, tile lock indicator light
will go out and tile settings can be changed.
4