WAGNER FINECOAT 9900 PLUS Instrucciones De Uso página 3

FC9900 Plus
1
SAFETY REGULATIONS
1.1
EXPLANATION OF SYMBOLS USED
This manual contains information that must be read and
understood before using the equipment. When you come to
an area that has one of the following symbols, pay particular
attention and make certain to heed the safeguard.
 This symbol indicates a potential hazard
that may cause serious injury or loss of life.
Important safety information will follow.
This symbol indicates a potential hazard

to you or to the equipment. Important
information that tells how to prevent
Attention
damage to the equipment or how to avoid
causes of minor injuries will follow.

Danger of skin burn injury
 Danger of fire from solvent and paint fumes
Danger of explosion from solvent, paint

fumes and incompatible materials
Danger of injury from inhalation of harmful

vapors

Ear protection must be worn
 Eye protection must be worn
i
Notes give important information which

should be given special attention.
1.2
SAFETY HAZARDS
HAZARD: EXPLOSION HAZARD DUE
TO INCOMPATIBLE MATERIALS
Will cause severe injury or property damage.
PREVENTION:
•
Do not use materials containing bleach or chlorine.
•
Do not use halogenated hydrocarbon solvents such as
methylene chloride and 1,1,1 - trichloroethane. They
are not compatible with aluminum and may cause an
explosion. If you are unsure of a material's compatibility
with aluminum, contact your coating's supplier.
A list of the materials used in the construction of
i
the equipment will be made available on request
to validate compatibility with the coating
materials to be used.
HAZARD: GENERAL
This product can cause severe injury or property
damage.
PREVENTION:
•
Read all instructions and safety precautions before
operating equipment.
•
Follow all appropriate local, state, and national codes
governing ventilation, fire prevention, and operation.
•
Use only manufacturer authorized parts. User assumes all
risks and liabilities when using parts that do not meet the
minimum specifications and safety devices of the pump
manufacturer.
•
Before each use, check all hoses for cuts, leaks, abrasion
or bulging of cover. Check for damage or movement of
couplings. Immediately replace the hose if any of these
conditions exist. Never repair a hose. Replace it with an
identical replacement hose.
•
NEVER aim the gun at any part of the body.
•
Wear clothing to keep paint off skin and hair.
•
Wear ear protection.
•
Do not spray outdoors on windy days.
•
Never leave this equipment unattended. Keep away from
children or anyone not familiar with the operation of HVLP
equipment.
SAFETY REGULATIONS
3